A rectifier consists of one control and one or more power modules.
Standard output series: up to 120V / 50-30000A, DC/polarity reversal.
Dual output:
The possibility of having one rectifier working as two rectifiers, i.e. independent control of two outputs (tanks). By buying a dual unit you save up to 10-15% of investment compared to two standard single units!
10 minutes for module replacement:
This sets a record for all modular designed rectifiers on the market!
Modularity built:
This increases both flexibility and reliability with the rectifier. If one Power Module should fail, the rectifier will still run but with a reduced output.
This is very important when working with large and/or expensive items, or for demanding and time-consuming processes. You will have possibility to «save» the batch. Ability to place up to 5 rectifiers in one stack.
Simple design:
Easy and fast access to all components in the rectifier. This guarantees very short production stops due to replacement or repair of components.
Pinpoint accuracy in settings:
Set current with an accuracy of 0.1A and voltage 0.01V.
Low ripple:
Our rectifier guarantees a ripple below 1% across the entire regulation range (0-100% output). Typical ripple is even lower, under most load conditions ripple is below 0.2%.
Energy savings:
Significant savings compared to thyristor rectifiers is possible! Tests have shown that it is possible to save up to 40% on energy!
Can be installed near the tanks:
The design of the power module allows you to position the rectifiers near the plating cells (tanks). The cooling air-flow is directed only through the central heat sink, this prevents the corrosive fumes entering compartments with sensitive electronics almost completely.
Swedish assembly:
All FlexKraft's are assembled at KraftPowercon Sweden AB in Surte. High-quality assembly with modern, top-class and reliable components, resulting in highest possible reliability and longer lifespan - up 20 years or longer!